Where to Buy 3D Printer Filament in Lebanon (2026 Prices)
Which shops sell filament in Lebanon, what a 1 kg spool actually costs, and a free tracker that checks every price for you each morning.
The short answer
A 1 kg spool of PLA in Lebanon typically sells for $15 to $25 depending on shop and brand, with PETG and ABS a few dollars higher and TPU higher again. Prices move week to week and differ by more than $10 between shops for a comparable spool, so we run a free tracker at filament.3dprintlb.com that checks every Lebanese seller each morning and shows the current cheapest.
Filament is the running cost of owning a 3D printer, and in Lebanon it is also the most volatile one. The same brand and colour can differ by more than ten dollars between two shops in the same week, and stock disappears without warning.
What a spool should cost
As a rule of thumb for a 1 kg spool from a recognised brand, in 2026:
- PLA and PLA+ — the widest choice and the cheapest, and what most people should buy first.
- PETG — a few dollars above PLA, for parts that live outdoors or in a hot car.
- ABS and ASA — similar to PETG, but they need an enclosed printer, which makes them a smaller part of the local market.
- TPU — the dearest per kilo, and more often sold in smaller quantities.
We deliberately do not publish fixed numbers here. Any figure written into a blog post is wrong within a month, and a stale price is worse than no price — it sends you to a shop expecting something that is not there.
Use the tracker instead
We built a free filament price tracker for Lebanon because we needed one ourselves. It visits every Lebanese shop that sells filament each morning, records the price and whether the item is in stock, and shows the cheapest spool per material right now — along with whether that price has just dropped.
- Filter by material: PLA, PLA+, PETG, TPU, ABS, ASA and more.
- See the price history of a specific spool, so you know whether today is a good day to buy.
- Subscribe on Telegram to be told when something you care about drops or returns to stock.
What to check besides the price
The cheapest spool is not always the best buy, and three things matter more than a two-dollar difference.
Whether it is actually 1 kg
Some listings quote a price for a 750 g or 500 g spool. Always compare cost per kilogram rather than cost per spool — the tracker normalises this so you are comparing like with like.
How it has been stored
Filament absorbs moisture from the air, and Lebanese coastal humidity is unkind to it. A spool that has sat unsealed on a shelf through a Beirut summer will print worse than a fresh one, whatever the price. Look for sealed bags with a desiccant pack inside.
Whether the shop has it now
A listed price means very little if the item is out of stock. The tracker records availability alongside price for exactly this reason.
If you do not own a printer
You do not need to buy filament at all to get something printed. Upload the file, pick a material, and the price you see already includes the plastic. The tracker is there for people who own machines; the print service is there for everyone else.
Frequently asked questions
How much does a 1 kg spool of PLA cost in Lebanon?
Usually between $15 and $25 in 2026, depending on brand and shop, with the spread between the cheapest and dearest seller regularly exceeding $10 for a comparable spool. The live figure is on our free tracker at filament.3dprintlb.com.
Where can I buy 3D printer filament in Lebanon?
Several specialist shops stock it, mostly around Beirut, and most sell online with delivery. Our tracker monitors each of them daily and links straight to the product page, which is faster than checking eight sites yourself.
Is the filament price tracker free?
Yes, completely, with no account required. It exists because we buy filament too and wanted the answer without opening eight tabs.
Which filament should I buy first?
PLA. It is the cheapest, the easiest to print, and right for most of what people make. Add PETG once you have a part that needs to survive heat or rain.
How should I store filament in Lebanon's humidity?
In a sealed box or bag with silica gel, not on an open shelf. Moisture is the main reason a spool that printed beautifully in March goes stringy and brittle by August.
Got a file to print?
Instant price, delivered anywhere in Lebanon for a flat $5.
