How Much Does 3D Printing Cost in Lebanon? (2026 Guide)
Real numbers, not ranges: what a 3D printed part costs in Lebanon in 2026, with worked examples from $13 delivered upward.
The short answer
The cheapest a single 3D printed part can cost in Lebanon on 3DprintLB is $13 delivered — an $8 minimum order plus $5 flat nationwide delivery. Most everyday parts land between $13 and $25 delivered. Material is charged per gram of printed plastic: $0.14/g for PLA, $0.16/g for PETG and $0.22/g for flexible TPU, plus a $3.50 order fee.
Almost every 3D printing shop in Lebanon answers this question with: send us the file. That is not evasiveness — the price genuinely does depend on the file — but it means nobody can budget before they start. Here is the whole formula, and enough worked examples to place your own part inside it.
What you are actually paying for
Three things, in descending order of importance: how many grams of plastic your part uses, which plastic it is, and how much of the machine's time it occupies. Everything else is a flat fee.
| Line | Amount |
|---|---|
| PLA — the everyday material | $0.14 per printed gram |
| PETG — tougher, heat and moisture resistant | $0.16 per printed gram |
| TPU — flexible | $0.22 per printed gram |
| Order fee (setup, inspection, packaging) | $3.50 per order, not per part |
| Minimum order | $8 before delivery |
| Delivery, anywhere in Lebanon | $5 flat, cash on arrival |
| Parts larger than 180 mm | +15% |
| Multi-colour printing | +25% on the part, plus $2 |
Six real parts, priced end to end
These are complete totals — part, order fee and delivery to your door. Nothing is added at checkout.
| What it is | Material | Printed weight | Total delivered |
|---|---|---|---|
| Fridge shelf clip | PLA | 10 g | $13.00 |
| Phone stand | PLA | 45 g | $14.80 |
| Phone case | TPU | 25 g | $14.00 |
| Set of 4 drone arms | PETG | 22 g each | $22.58 |
| Decorative vase, 200 mm tall | PLA | 160 g | $34.26 |
| Functional bracket at 50% infill | PETG | 120 g | $27.70 |
Notice the first row. A 10 g clip is worth about $1.40 of plastic, but it still costs $13 delivered, because the minimum order and the courier do not care how small your part is. This is the single most important thing to understand about the price: below roughly 30 grams, you are paying for the trip, not the part.
How to pay less for the same thing
- Order several parts at once. The $3.50 order fee and the $5 delivery are charged once per order, however many parts are in it.
- Choose the lowest strength that does the job. A decorative piece at 15% infill uses noticeably less plastic than the same shape at 50%.
- Print more than five of anything and a quantity discount applies automatically: 5% from five units, 10% from ten, 20% from twenty-five.
- Verified students get 10% off, and 15% on a first order placed with a friend's referral code.
- Scale the model down if the exact size is not critical. Halving every dimension cuts the plastic to roughly an eighth.
When we stop quoting instantly
Two limits, both there for the same honest reason: past them the price stops being about plastic and starts being about labour. A model estimated over 400 grams, or larger than 250 mm in any direction, is quoted as a project rather than by weight — because it has to be split across several print beds, supported, bonded and finished by hand, and none of that is captured by a per-gram rate.
You still upload the same file in the same place. Instead of a number you get a note saying we will quote it properly, usually within a day. Architectural models and large display pieces almost always land here.
Why the price is in dollars
Filament is imported and priced in dollars, so quoting in lira would mean rebuilding the price list every time the rate moves. You pay the courier in cash when the part arrives — nothing upfront, and no card needed.
Frequently asked questions
What is the cheapest possible 3D printing order in Lebanon?
$13 delivered. That is the $8 minimum order plus the $5 flat delivery fee. Any part lighter than about 30 grams will hit this floor, so it is worth adding a second part rather than ordering a single tiny one.
Is delivery included in the price?
No — delivery is a separate $5, flat, anywhere in Lebanon, and it is shown in the total before you order. You pay the courier in cash when the part arrives.
Why does my part cost more than a similar-looking one?
Almost always weight or strength. Two parts can look identical and differ threefold in printed grams if one is hollow and one is dense, or if one is set to 15% infill and the other to 50%. Upload both files and the quote engine will show you the difference.
Do you charge in US dollars or Lebanese lira?
US dollars, paid in cash on delivery. Filament is imported and priced in dollars, so a lira price list would be out of date within days.
Can I get a price without talking to anyone?
Yes. Upload an STL or OBJ file on the site and the price appears immediately, in your browser, with no account and no waiting for a reply.
Is there a discount for printing many copies?
Yes, and it applies automatically: 5% from five units of the same part, 10% from ten, and 20% from twenty-five.
Got a file to print?
Instant price, delivered anywhere in Lebanon for a flat $5.
