Design5 min read·

How to Brief a Designer for a Custom Print

A copyable checklist for describing a part you want designed and printed: what it does, where it lives, the measurements and photos that get a firm price fast.

Illustration of a clipboard checklist beside a printed cube and a ruler.

The short answer

A good brief for a custom print says what the object does, where it will live, its size with at least one real measurement, how many you need and by when. Add two to four clear photos from different angles with a ruler or coin in shot. On 3DprintLB you send this on the custom request page and get a free WhatsApp consultation within 24 hours.

Most custom jobs that take a week of back and forth could have taken a day. The difference is almost never the design work. It is the first message. "I need a holder for my thing" starts a long conversation; three measurements and two photos start a quote.

Here is the checklist we would ask you to fill in if we could. Copy it into the description box on the custom request form and answer each line in a few words.

The brief checklist

  1. What is it? One sentence. "A replacement lid hinge for a blender."
  2. What does it do? What holds it, what does it hold, what moves?
  3. Where will it live? Indoors or outside, in sun, near heat, near water?
  4. Size: at least one real measurement in millimetres or centimetres. More is better.
  5. What does it attach to or fit into? Screw sizes, hole spacing, the thickness of the shelf or pipe.
  6. How much force does it take? Hand pressure, the weight of a bag, something clicking shut?
  7. How should it look? Colour, matte or shiny, does a visible face matter?
  8. How many? One, a pair, a set of ten?
  9. By when? A real date, and whether it is fixed.
  10. Budget, if you have one. It shapes the options we suggest.
  11. Photos: two to four, from different angles, with a ruler or coin beside the part.

Why each line matters

Function before shape

A designer can copy a shape from a photo. What a photo cannot show is the load, the direction it comes from and what happens if the part fails. That decides the material, the thickness and the orientation it is printed in. A shelf clip and a toy with the same outline are designed differently.

Where it lives

A part on a sunny balcony needs PETG, not PLA, and a light colour so it does not heat up. A part near a sink should not have deep crevices. Saying "outside, full sun" in your brief settles the material question in one line.

Measurements beat descriptions

"About the size of a phone" is a guess. "62 mm wide, 8 mm thick, two holes 40 mm apart" is a design. If the part fits onto something else, the measurement of that something matters more than the part itself. How to measure a broken part shows how to measure with a ruler or calipers.

Photos that help

  • Shoot in daylight, on a plain surface.
  • One straight-on photo of each important face, plus one at an angle.
  • A ruler or a coin right beside the part, not behind it.
  • If it is broken, photograph the broken edge and where it attaches.
  • If it fits onto something, photograph that too.

A vague brief and a useful one

VagueUseful
I need a hook.A wall hook for a backpack, screwed into a wooden door with two screws.
Something to hold my router.A wall bracket for a router 180 mm wide and 30 mm deep, indoors.
A part for my cupboard.A replacement shelf peg, 5 mm pin, the old one snapped. Photo attached.
A gift with a name on it.A desk nameplate, about 15 cm long, white with black raised letters, needed by Friday.

What happens after you send it

  1. Within 24 hours we message you on WhatsApp to talk through the details, the options and whether it can be done well.
  2. You get one firm price covering design, printing and delivery. Nothing starts until you approve it.
  3. You approve a design preview before anything is printed.
  4. We print it, and a courier brings it anywhere in Lebanon. You pay in cash on delivery.

If you already have a 3D file, skip the brief and use the instant quote instead: upload an STL or OBJ and the price appears in under a minute. For architecture students, the scale check tells you which scales your model survives before you brief anyone.

Things a brief cannot fix

Some jobs are not a design problem. A part that takes a person's weight, a safety item, anything under pressure or near a flame is the wrong job for printed plastic however well it is briefed. We will tell you so in the consultation rather than quote it. What cannot be 3D printed lists the usual ones.

Frequently asked questions

What should I include in a 3D design brief?

What the object does, where it will be used, at least one real measurement, what it attaches to, how many you need, your deadline and your budget if you have one. Add two to four photos with a ruler or coin beside the part.

Can you design a part from photos only?

Often, yes, as long as the photos include a ruler or coin for scale and you add the key measurements. Parts that must fit precisely onto something else need that something measured too.

How long does a custom design quote take in Lebanon?

On 3DprintLB you get a WhatsApp consultation within 24 hours of sending the custom request form, then one firm price for design, printing and delivery.

Do I pay for the consultation?

No. The consultation is free and there is no obligation. You only pay once you have approved the firm price, and for delivered orders the courier collects cash on delivery.

What if I do not know the material I need?

Leave the material box empty and say where the part will live and what it does. That is enough for us to suggest PLA, PETG or TPU.

Got a file to print?

Instant price, delivered anywhere in Lebanon for a flat $5.

Keep reading