15 Everyday Objects and What They Cost to Print
Quotes for 15 ordinary objects, from a $13 cable clip to a $32.65 vase, worked out with the live 3DprintLB price engine, with the minimum order explained.

The short answer
A single small object such as a cable clip, cake topper or cabinet knob costs $13 delivered on 3DprintLB, because every order has an $8 minimum plus $5 delivery. A phone stand comes to about $14.80, a desk organiser about $23.90, and a 200 mm vase about $32.65. These are estimates: the real price comes from your file's volume.
Every figure below was run through the same code that prices an upload on the home page. It is the honest way to answer "how much would this cost" without a file, as long as you read the assumptions first.
The assumptions
- The gram figure is the printed weight the quote engine would estimate for a typical object of that kind and size. Your own file will be lighter or heavier, and the price moves with it.
- Standard strength unless stated. Strong costs more because more plastic goes inside the part; Light costs less.
- PLA at $0.14 per gram, PETG at $0.16, TPU at $0.22.
- Each row is a separate order of that one item, so it carries the full $3.50 order fee and $5 delivery.
- Anything over 180 mm on its longest side carries a 15% size surcharge. Only the vase in this list is that big.
The table
| Object | Material, strength | Est. grams | Part price | Delivered total |
|---|---|---|---|---|
| Cable clip, about 30 mm | PLA, Standard | 3 g | $0.42 | $13.00 (minimum) |
| Cake topper, about 120 mm wide | PLA, Standard | 10 g | $1.40 | $13.00 (minimum) |
| Cabinet knob, about 40 mm | PLA, Standard | 12 g | $1.68 | $13.00 (minimum) |
| Wall hook | PETG, Standard | 15 g | $2.40 | $13.00 (minimum) |
| Furniture feet, set of 4 | TPU, Standard | 8 g each | $1.76 each | $15.54 |
| Shelf bracket | PETG, Strong | 35 g | $5.60 | $14.10 |
| Name plaque, two colours | PLA, Standard, multi-colour | 40 g | $9.00 | $17.50 |
| Phone stand | PLA, Standard | 45 g | $6.30 | $14.80 |
| Headphone hanger | PLA, Standard | 60 g | $8.40 | $16.90 |
| Small plant pot | PETG, Standard | 70 g | $11.20 | $19.70 |
| Remote control holder | PLA, Standard | 80 g | $11.20 | $19.70 |
| Electronics box with lid | PETG, Standard | 90 g | $14.40 | $22.90 |
| Desk organiser | PLA, Standard | 110 g | $15.40 | $23.90 |
| Decorative vase, 200 mm tall | PLA, Light | 150 g | $24.15 | $32.65 |
| Keychains, 25 identical | PLA, Standard | 6 g each | $0.84 each | $25.30 ($1.01 each) |
Why the first four all cost $13
The plastic in a cable clip is worth 42 cents. Nobody can set up a machine, check the part, pack it and hand it to a courier for that, so every order has an $8 minimum before delivery. The $3.50 order fee counts towards it. If your parts plus the fee come to less than $8, the order is topped up to $8, and $5 delivery goes on top. That is where $13 comes from.
The minimum is per order, not per part, which is the useful bit. A cable clip ($0.42), a cabinet knob ($1.68) and a wall hook ($2.40) in one order add up to $4.50. With the $3.50 fee that is exactly $8, so all three arrive for $13, the same as any one of them alone. If you have several small fixes waiting, send them together.
What moves a price up or down
- Size, more than anything. Weight follows volume, so a part twice as long in every direction holds roughly eight times the plastic.
- Strength. Strong and Solid fill more of the inside with plastic. Use them for brackets and hooks, not for ornaments.
- Material. PETG costs a little more than PLA and is worth it outdoors or in heat. TPU costs the most and is only for parts that need to bend.
- Colour count. A two-colour part costs 25% more plus $2, which is why the plaque is $9.00 rather than $5.60.
- Quantity. Copies of the same part get 5% off from 5, 10% from 10 and 20% from 25. The keychains show it: 25 at $0.84 is $21.00, less 20% is $16.80.
The furniture feet are a small example of the same thing. Four TPU feet at $1.76 is $7.04. That plus the $3.50 fee is already over $8, so there is no top-up, and the order is $15.54 delivered.
Where the instant price stops
The engine prices parts up to 400 g and 250 mm on the longest side. Past either limit, the upload asks for a consultation instead of showing a number, and a person quotes it, usually within a day. That is deliberate: on big pieces, splitting, supports and finishing cost far more than the plastic, and a per-gram price would be a promise nobody could keep. Printing bigger than the build plate explains how those jobs are made.
How to get your real number
- Upload your STL or OBJ on the home page. No account needed.
- Pick material, colour, strength and quantity. The price updates as you change them.
- Add any other parts to the same order before checking out, to share the minimum and the delivery.
- Pay the courier in cash when it arrives.
No file? Send photos and measurements through custom projects and the price comes after a free consultation. For the logic behind every number here, read how we price a 3D print, and for a wider view of costs, how much 3D printing costs in Lebanon.
Frequently asked questions
What is the cheapest thing I can get 3D printed in Lebanon?
Any single small part costs $13 delivered on 3DprintLB. Orders have an $8 minimum that includes the $3.50 order fee, and delivery is a flat $5. Several small parts in one order can share that same $13.
How much does it cost to 3D print a knob?
A typical cabinet knob of about 12 g in PLA is $1.68 of plastic, but as a single order it comes to $13 delivered because of the $8 minimum and $5 delivery. Your exact price depends on the file.
How much does a 3D printed phone stand cost?
About $14.80 delivered for a 45 g PLA phone stand at Standard strength: $6.30 of plastic, a $3.50 order fee and $5 delivery. A heavier or bigger design costs more.
Is it cheaper to print several things in one order?
Yes. The $3.50 fee, the $8 minimum and the $5 delivery are per order, not per part. Three small parts that would each cost $13 on their own can arrive together for $13.
Do you give discounts for printing many copies?
Yes, on copies of the same part: 5% from 5, 10% from 10 and 20% from 25. Twenty-five 6 g PLA keychains come to $25.30 delivered, about $1.01 each.
Got a file to print?
Instant price, delivered anywhere in Lebanon for a flat $5.


