Guides5 min read·

Seven 3D Printing Myths We Hear Every Week

No, you do not need a printer, a file, or to live near a workshop. Seven things people in Lebanon believe about 3D printing, and what is actually true.

Illustration of a printed cube under a large question mark, with a second cube beside it under a tick.

The short answer

The most common 3D printing myths are that you need your own printer, that you need a 3D file, and that prints are too weak to be useful. In Lebanon you can upload a file for an instant USD price or send photos for a free consultation, and have a printed part delivered anywhere in the country with cash on delivery. Small parts often cost a few dollars in plastic, with an $8 order minimum before delivery.

Most of the questions we answer on WhatsApp start with a belief that is half right. Here are the seven we hear most, and what is true instead.

1. "You need to own a 3D printer"

You do not. A printer is worth buying if you print most days and enjoy tuning a machine. For a few parts a year, a service is cheaper and far less work: you upload a file, see the price, and a courier brings the part. Buy a printer or use a service does the sums for both.

2. "You need a 3D file"

Helpful, not required. Most people who message us have a broken part, a sketch or an idea, not a file. On the custom request page you describe what you need and attach up to four photos, and we come back on WhatsApp within 24 hours with a free consultation. You get a firm price for design, printing and delivery before anything starts.

3. "Printed parts are just toys"

A well-designed PLA or PETG part is properly useful: brackets, clips, hooks, enclosures, replacement knobs, workshop jigs. The catch is direction. A print is weaker between its layers, so it has to be oriented for the load. It also has limits: nothing that holds a person's weight, nothing heavy overhead, nothing that is safety equipment. How strong is a 3D print covers what to trust and what not to.

4. "Solid is always stronger, so print it solid"

This one costs people money. Most of a printed part's strength comes from its outer shell, not from how full the inside is. Going to Solid makes a part heavier and more expensive for a modest gain. On a palm-sized PLA part of 60 cm³, our formula estimates about $6.77 on Strong and $10.42 on Solid, before fees. Strong is the right choice for most functional parts. Tell us what the part does and we will tell you if it needs more.

5. "It prints in a few minutes"

Videos speed it up. A small part takes an hour or two on the machine and a larger one can take most of a day, because the printer lays down every layer one strand at a time. On the site, printing plus courier delivery is 3 to 5 days for an instant-quote order. How long does a 3D print take explains what sets the time.

6. "You have to live near a workshop"

Not any more. Orders are printed by vetted partner printers or in-house, then sent by courier anywhere in Lebanon for a flat $5. You pay when the parcel arrives, in cash (dollars or lira) or by Whish, and nothing is paid upfront. The coast, the mountains and everywhere in between get the same price and the same process.

7. "Anything can be printed"

A lot can. Not everything. These are the limits that come up most:

  • Size: a single printed piece is limited to 250 mm on its longest side. Bigger models are split, printed in sections and bonded, and quoted as a project.
  • Weight: a model estimated above 400 g also moves to a project quote, because finishing and handling become most of the cost.
  • Food contact: a printed part should not be treated as food-safe. See is 3D printing food safe.
  • Thin walls and fine detail: anything thinner than about a millimetre at the printed size is fragile or will not print at all.
  • Glass-clear parts: transparent PETG prints frosted, not clear.
  • Heat: none of our materials belongs near a stove, a flame or a heater.

What cannot be 3D printed has the longer list.

A bonus one: "It must be expensive"

Small parts are often cheap. A small knob or clip may use only a dollar or two of plastic. Every order adds a flat $3.50 service fee for setup, checks and packaging, and parts plus that fee have an $8 minimum, so the smallest possible order is $13 including delivery. Most household fixes land close to that. Upload your file on the instant quote and the price appears in under a minute, with no account.

Frequently asked questions

Do I need my own 3D printer to get something printed in Lebanon?

No. You can upload an STL or OBJ file for an instant price in US dollars, or send photos and a description for a free consultation, and the part is delivered anywhere in Lebanon with cash on delivery.

Can I get something 3D printed without a file?

Yes. Describe what you need on the custom request page and attach up to four photos or a sketch. You get a WhatsApp consultation within 24 hours and a firm price before anything is designed or printed.

Is 3D printing expensive?

Small parts are often cheap. Plastic is charged per printed gram, every order has a $3.50 service fee, parts plus fee have an $8 minimum, and delivery is a flat $5. The smallest possible order is $13 delivered.

Is a solid 3D print stronger?

Somewhat, but it is rarely worth it. Most of the strength comes from the outer shell. The Strong option suits most functional parts and costs much less than Solid.

How long does it take to get a 3D print delivered in Lebanon?

For an instant-quote order on 3DprintLB, printing and courier delivery take 3 to 5 days. Larger projects are scheduled when they are quoted.

Got a file to print?

Instant price, delivered anywhere in Lebanon for a flat $5.

Keep reading